Contribute to coordinate the deployment and continuous

Elenco contribute to coordinate the deployment and continuous

  • Warm and gentle led lights: touch the metal ring to switch the color and turn off the lightlong press the metal ring to adjust the brightness, and it has the brightness memory functioninsert the dc connectortouch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from yellow to whitecharging port and switch integration: simple, beautiful and practical, easy to operatebrand: decbestfeatures:- 3d printing technology: print layer by layer, restore the real appearance of the moonsafe and environmentally friendly: pla material extracted from corn stalks, hard and smooth, non-toxic, odorless, environmentally friendlyif your hand is too dry or the temperature is too low, the light may not respondand its also a great decoration for your houseeasy to put anywhere you like with the wood holderthe white light will not shine when power is lowlong using time: 300mah built-in battery, after the full charge, the lamp can be used at least about 6 hours, a full charge takes about 2 hours91- material: pla- bulb: 1pcs white led light and 1pcs yellow led light- battery capacity: 1 x 300mah li-po battery (built-in)- charging time: about 2 hours- working time: about 6 hours at least (depends on brightness)- power supply: usbhow to use:1you can hold it on your handspecifications:- diameter: 15cm/5a perfect gift: express your love with this warm giftyour kids or beloved one are unable to resist this charming gift

    Italia

    34790000915527344 €

  • Ensure there are no pleats by continuing to flat the cloth, and pay attention to fabric to make the warp and the welt both vertical and horizontal, and finally tighten the screws so that you do not have to constantly pull the sides of the fabric to tighten3unscrew the outer hoop, place the fabric over the inner hoop, lock the outer hoop, flat the cloth, then screw but dont too tightly2and the pattern can be washed off after you finishthe way to check the tightness is to use a needle with thread going tcheck the hoop whether it is tight enough● warm tips: the pattern is made of special ink, meet the water will disappear, do not touch water before finishingembroidery hoops have a brass adjustment screw that is easy to keep the fabric tight● there is delicate colored flower partten on the cloth, which will provide great help to starter)〖features〗● valuable hand embroidery set: full range of embroidery starter kit with all the tools you need to embroiderhow to use embroidery hoops:1〖specification〗material: metal needle, polyester cotton thread, cotton linen clothpattern: multi patterns optionalproduction time: about 4-6 hours (the production time will vary according to each persons ability)hoop size: (l) x (w) 20 x 20 cm / 8 x 8 inch (appr)embroidered cloth size: (l) x (w) 30 x 30 cm / 12 x 12 inch (appr● package content: (1 pack)color threads, (1pcs)embroidery hoop,(1pcs) cotton linen cloth with stamped pattern on it,(2pcs)embroidery needles, (1pcs)instruction

    Italia

    12130000114440918 €

  • Unscrew the outer hoop, place the fabric over the inner hoop, lock the outer hoop, flat the cloth, then screw but don't too tightly2ensure there are no pleats by continuing to flat the cloth, and pay attention to fabric to make the warp and the welt both vertical and horizontal, and finally tighten the screws so that you do not have to constantly pull the sides of the fabric to tighten3and the pattern can be washed off after you finishthe way to check the tightness is to use a needle with thread going through the fabric scheck the hoop whether it is tight enough● warm tips: the pattern is made of special ink, meet the water will disappear, do not touch water before finishingembroidery hoops have a brass adjustment screw that is easy to keep the fabric tight● there is delicate colored flower partten on the cloth, which will provide great help to starter)〖features〗● valuable hand embroidery set: full range of embroidery starter kit with all the tools you need to embroiderhow to use embroidery hoops:1)embroidered cloth size: (l) x (w) 25 x 25 cm / 10 x 10 inch (appr● package content: (1 pack)color threads, (1pcs)embroidery hoop,(1pcs) cotton linen cloth with stamped pattern on it,(2pcs)embroidery needles〖specification〗material: metal needle, polyester cotton thread, cotton linen clothpattern: multi patterns optionalproduction time: about 4-6 hours (the production time will vary according to each person's ability)hoop size: (l) x (w) 20 x 20 cm / 8 x 8 inch (appr

    Italia

    12130000114440918 €

  • Ensure there are no pleats by continuing to flat the cloth, and pay attention to fabric to make the warp and the welt both vertical and horizontal, and finally tighten the screws so that you do not have to constantly pull the sides of the fabric to tighten3unscrew the outer hoop, place the fabric over the inner hoop, lock the outer hoop, flat the cloth, then screw but dont too tightly2and the pattern can be washed off after you finishthe way to check the tightness is to use a needle with thread going through the fabric scheck the hoop whether it is tight enough● warm tips: the pattern is made of special ink, meet the water will disappear, do not touch water before finishingembroidery hoops have a brass adjustment screw that is easy to keep the fabric tight● there is delicate colored flower partten on the cloth, which will provide great help to starter)〖features〗● valuable hand embroidery set: full range of embroidery starter kit with all the tools you need to embroiderhow to use embroidery hoops:1)embroidered cloth size: (l) x (w) 25 x 25 cm / 10 x 10 inch (appr〖specification〗material: metal needle, polyester cotton thread, cotton linen clothpattern: multi patterns optionalproduction time: about 4-6 hours (the production time will vary according to each persons ability)hoop size: (l) x (w) 20 x 20 cm / 8 x 8 inch (appr● package content: (1 pack)color threads, (1pcs)embroidery hoop,(1pcs) cotton linen cloth with stamped pattern on it,(2pcs)embroidery needles

    Italia

    120600004196167 €

  • Unscrew the outer hoop, place the fabric over the inner hoop, lock the outer hoop, flat the cloth, then screw but don't too tightly2ensure there are no pleats by continuing to flat the cloth, and pay attention to fabric to make the warp and the welt both vertical and horizontal, and finally tighten the screws so that you do not have to constantly pull the sides of the fabric to tighten3and the pattern can be washed off after you finishthe way to check the tightness is to use a needle with thread going tcheck the hoop whether it is tight enough● warm tips: the pattern is made of special ink, meet the water will disappear, do not touch water before finishingembroidery hoops have a brass adjustment screw that is easy to keep the fabric tight● there is delicate colored flower partten on the cloth, which will provide great help to starter)〖features〗● valuable hand embroidery set: full range of embroidery starter kit with all the tools you need to embroiderhow to use embroidery hoops:1)embroidered cloth size: (l) x (w) 30 x 30 cm / 12 x 12 inch (appr● package content: (1 pack)color threads, (1pcs)embroidery hoop,(1pcs) cotton linen cloth with stamped pattern on it,(2pcs)embroidery needles, (1pcs)instruction〖specification〗material: metal needle, polyester cotton thread, cotton linen clothpattern: multi patterns optionalproduction time: about 4-6 hours (the production time will vary according to each person's ability)hoop size: (l) x (w) 20 x 20 cm / 8 x 8 inch (appr

    Italia

    129399995803833 €

  • You can directly use the potentiometer (and the adjustment knob) to control the rotation of the servo, and then press the button, the middle light will light upconnect the power supply from the right single row of pins, the three blue lights will light up at the same time, and then the leftmost light will light upthe servo will rotate continuously, and then rotate reversely after being stuck, and cycle in turnif you want to test the motor,please first connect the escwhen the leftmost light is on, it is the manual adjustment modethe left side is connected to the servo, which can be divided into three groups: upper, middle and lowerit can easily detect and configure server virtual bit, jitter and middle positionpress the button again, and the rightmost light will light up, at this time, it is an automatic test modeat this time, it is the centering test modethree servos can be tested at the same timecaratteristiche:- small size,low power consumption,high reliability and easy operationnota:this product cant test the servo whose weight is more than 55gat this time, you can select three modes through the mode selection buttondescrizione:item name: servo testersize: 46x32x17mmweight: 8gcolore bluinput: dc 40)segnale di uscita: 1,5 ms ± 0,5 msadjustment methods: manual, neutral, automaticmcu control,good stability,high accuracy0voutput: ≤15ma (5versione 1 pezzo inclusa:1x servo tester3 pieces versican connect two servos or esc

    Italia

    646999979019165 €

  • Long press the metal ring to adjust the brightness, and it has the brightness memory functioninsert the dc connector into the metal ring at the bottom of the moon lamp to charge, the red light is always on during the chargingtouch the metal ring at the bottom of the moon lamp to turn on / off the light and change color from white to yellowperfect night light- white and yellow lighting color, you can switch freedom by the touch button at the bottom, comfortable glow to any roomif your hand is too dry or the temperature is too low, the light may not respondthe white light will not shine when power is lowthe red light will automatically turn off when fully chargedfeatures:3d technology- this lamp is made by innovative 3d printing technology, layer by layer stack, restore the real appearance of the moonbrilliant design- rechargeable battery and usb charging (include cable without adapter);it brings you mystery and romance, this night light is just what you need for an out of this world lighting experiencepackage included:1 x moon light1 x usb charging cable1 x solid wood scaffolddiameter size: 20cm/7good gift- this lamp adopting non-toxic, odorless, environmentally friendly pldm material, it is a perfect gift to girls boys kids, your loved one or girlfriend

    Italia

    4641999816894531 €

Non hai trovato ciò che cercavi? Prova un'altra ricerca

Ricerche relazionate contribute to coordinate the deployment and continuous